kanotix.com

Graphik, Video, Sound - Ati 8.28.8+Kernel 2.6.17.13+KDE3.5.4 TFT 1440x990???
Flatbag - 14.09.2006, 20:46 Uhr
Titel: Ati 8.28.8+Kernel 2.6.17.13+KDE3.5.4 TFT 1440x990???
Hallo,

ich bin seit kurzem auf von Kubuntu auf Kanotix (Easter2006RC4) umgestiegen. Meine Installation läuft auf Ati 8.28.8 und Kernel 2.6.17.13, auf aktuellem Stand (d-u script).

Grafikkarte: ATI 850XT

Jetzt mein Problem: Unter Kubuntu war es möglich, mein 16:9 TFT (Captiva) unter 1440x990, 60Hz anzusteuern.

Unter Kanotix schaffe ich dieses nicht.

Hier die entsprechenden Auszüge aus meiner xorg.conf:

Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
# HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
# VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xorg/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
#640x350 @ 85Hz (VESA) hsync: 37.9kHz
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
# Additional modelines
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
# 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
# 1280x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 80.14 MHz
# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
# 1368x768 @ 60.00 Hz (GTF) hsync: 47.70 kHz; pclk: 85.86 MHz
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
#1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
# 1440x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 126.27 MHz
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
# 1920x1200 @ 60.00 Hz (GTF) hsync: 74.52 kHz; pclk: 193.16 MHz
EndSection

Section "Device"
Option "RenderAccel" "1"
### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
#Option "sw_cursor"
#Option "hw_cursor"
#Option "NoAccel"
#Option "ShowCache"
#Option "ShadowFB"
#Option "UseFBDev"
#Option "Rotate"
Identifier "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
Driver "fglrx"
Option "UseInternalAGPGART" "no"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "MonitorLayout" "AUTO, AUTO"
VendorName "All"
BoardName "All"
# BusID "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection


Die vorgegebenen modelines habe ich schon getestet, bringt aber nichts, ebenso knxcc bzw. KDE Kontrollzentrum.

Unter Modes habe ich auch schon 1440x990 getestet, bringt ebenfalls nichts.

BTW: Die Schriften unter KDE sehen fürchterlich aus (Arial).

Und noch etwas: nach d-u-fixes script musste ich meine DSL Verbindung "MyPPPoe conf" neu einrichten (kein Router etc. sondern Teledat 430 LAN Modem), so daß die Verbindung beim booten hergestellt wird. In KDE muß ich jedoch jedesmal manuell aus der Konsole mittels PON die Verbindung herstellen.

Irgendwelche Hinweise für mich!?

Vielen Dank!
Gruß,

Flatbag
ockham23 - 14.09.2006, 21:35 Uhr
Titel: RE: Ati 8.28.8+Kernel 2.6.17.13+KDE3.5.4 TFT 1440x990???
Code:
SubSection "Display"
Depth 24
Modes "1400x1050" "1280x1024" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
Vielleicht einfach mal "1440x990" in der Zeile "Modes" einfügen. Wie hat denn die xorg.conf bei Kubuntu ausgesehen? Die Daten müsstest du mit Kanotix auch verwenden können.

Zum Thema "DSL-Modem" hab ich hier mal was geschrieben: http://kanotix.com/PNphpBB2-viewtopic-t-20025-start-15.html
Alle Zeiten sind GMT + 1 Stunde
PNphpBB2 © 2003-2007