31.10.2024, 23:30 UhrDeutsch | English
Hallo Gast [ Registrierung | Anmelden ]

Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
Autor Nachricht
MadMax
15 Titel: [gelöst] Wlan Adapter HP-Pavillion Notebook keine Verbindung  BeitragVerfasst am: 04.07.2011, 19:37 Uhr



Anmeldung: 18. Jan 2005
Beiträge: 162

Hi Kanotixgemeinde,
hab mir die Hellfire Distri installiert und habe nun Probleme den intern verbauten Wlan-Adapter meines HP-Pavillion-Notebooks ans laufen zu bekommen, D-Link-Wlan-Stick funktioniert einwandfrei.
Hier mal die Ausgabe von iwconfig:
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
und von iwlist scanning:
root@Laptop:/home/horst# iwlist scanning
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

wlan0 Interface doesn't support scanning : Network is down

pan0 Interface doesn't support scanning.

wenn der Wlan-Stick mit angesteckt ist sieht das ganze so aus:
root@Laptop:/home/horst# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off

pan0 no wireless extensions.

wlan1 IEEE 802.11bg ESSID:"Pflegefaelle"
Mode:Managed Frequency:2.462 GHz Access Point: BC:05:43:11:28:4B
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=60/70 Signal level=-50 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:5 Missed beacon:0

wie bringe ich den wlan0 dazu nach Netzwerken zu scannen?
Danke schon mal für eure Hilfe,
greetz
MadMax


Zuletzt bearbeitet von MadMax am 12.08.2011, 13:41 Uhr, insgesamt ein Mal bearbeitet
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Kano
Titel: Wlan Adapter HP-Pavillion Notebook keine Verbindung  BeitragVerfasst am: 04.07.2011, 22:47 Uhr



Anmeldung: 17. Dez 2003
Beiträge: 16790

lspci -vnn

dmesg
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
MadMax
Titel:   BeitragVerfasst am: 06.07.2011, 21:30 Uhr



Anmeldung: 18. Jan 2005
Beiträge: 162

Hi Kano,
hier mal die Ausgabe von lspci -vnn:
n
00:00.0 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02f7] (rev a2)
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <access denied>

00:00.1 RAM memory [0500]: nVidia Corporation C51 Memory Controller 0 [10de:02fa] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: 66MHz, fast devsel

00:00.2 RAM memory [0500]: nVidia Corporation C51 Memory Controller 1 [10de:02fe] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: 66MHz, fast devsel

00:00.3 RAM memory [0500]: nVidia Corporation C51 Memory Controller 5 [10de:02f8] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: 66MHz, fast devsel

00:00.4 RAM memory [0500]: nVidia Corporation C51 Memory Controller 4 [10de:02f9] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0

00:00.5 RAM memory [0500]: nVidia Corporation C51 Host Bridge [10de:02ff] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <access denied>

00:00.6 RAM memory [0500]: nVidia Corporation C51 Memory Controller 3 [10de:027f] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: 66MHz, fast devsel

00:00.7 RAM memory [0500]: nVidia Corporation C51 Memory Controller 2 [10de:027e] (rev a2)
Flags: 66MHz, fast devsel

00:02.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c2000000-c3ffffff
Prefetchable memory behind bridge: 00000000c8200000-00000000c83fffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:03.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: c4000000-c5ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:04.0 PCI bridge [0604]: nVidia Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: c6000000-c7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:09.0 RAM memory [0500]: nVidia Corporation MCP51 Host Bridge [10de:0270] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities: <access denied>

00:0a.0 ISA bridge [0601]: nVidia Corporation MCP51 LPC Bridge [10de:0260] (rev a3)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0
I/O ports at 1d00 [size=128]

00:0a.1 SMBus [0c05]: nVidia Corporation MCP51 SMBus [10de:0264] (rev a3)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: 66MHz, fast devsel, IRQ 10
I/O ports at 3040 [size=64]
I/O ports at 3000 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus

00:0a.3 Co-processor [0b40]: nVidia Corporation MCP51 PMU [10de:0271] (rev a3)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10
Memory at c0040000 (32-bit, non-prefetchable) [size=256K]

00:0b.0 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026d] (rev a3) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at c0004000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd

00:0b.1 USB Controller [0c03]: nVidia Corporation MCP51 USB Controller [10de:026e] (rev a3) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at c0005000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:0d.0 IDE interface [0101]: nVidia Corporation MCP51 IDE [10de:0265] (rev f1) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
I/O ports at 3080 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_amd

00:0e.0 IDE interface [0101]: nVidia Corporation MCP51 Serial ATA Controller [10de:0266] (rev f1) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
I/O ports at 30c0 [size=8]
I/O ports at 30b4 [size=4]
I/O ports at 30b8 [size=8]
I/O ports at 30b0 [size=4]
I/O ports at 3090 [size=16]
Memory at c0006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv

00:10.0 PCI bridge [0604]: nVidia Corporation MCP51 PCI Bridge [10de:026f] (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=64
Memory behind bridge: c8000000-c80fffff
Capabilities: <access denied>

00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at c0000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel

00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller [10de:0269] (rev a3)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at c0008000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 30e0 [size=8]
Capabilities: <access denied>
Kernel driver in use: forcedeth

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Flags: fast devsel
Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Flags: fast devsel

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Flags: fast devsel

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Flags: fast devsel
Capabilities: <access denied>
Kernel driver in use: k8temp

03:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11a/b/g [14e4:4312] (rev 01)
Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN [103c:1361]
Flags: bus master, fast devsel, latency 0, IRQ 19
Memory at c4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge

05:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [GeForce Go 7200] [10de:01d6] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30b7]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at c7000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at c6000000 (64-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: nouveau

07:05.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, medium devsel, latency 64, IRQ 5
Memory at c8000000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci

07:05.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 19)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: bus master, medium devsel, latency 64, IRQ 7
Memory at c8000800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci

07:05.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 0a)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: medium devsel, IRQ 11
Memory at c8001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>

07:05.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 05)
Subsystem: Hewlett-Packard Company Presario V6133CL [103c:30b7]
Flags: medium devsel, IRQ 7
Memory at c8001400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: r852

und dmesg:
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-7-generic (pbuilder@Kanotix) (gcc version 4.4.5 (Debian 4.4.5-Cool ) #35kanotix1 SMP Wed Mar 16 19:24:25 UTC 2011 (Ubuntu 2.6.38-7.35kanotix1-generic 2.6.3Cool
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff00000 (usable)
[ 0.000000] BIOS-e820: 000000003ff00000 - 000000003ff15000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff15000 - 000000003ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv6000 (RG907EA#ABD) /30B8, BIOS F.3D 11/22/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3ff00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f8920] f8920
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 2ee67000 - 2ff80000
[ 0.000000] ACPI: RSDP 000f88f0 00014 (v00 HP )
[ 0.000000] ACPI: RSDT 3ff0bd23 0003C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 3ff14d10 00074 (v01 HP MCP51M 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 3ff0bd5f 08FB1 (v01 HP MCP51M 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 3ff15fc0 00040
[ 0.000000] ACPI: SSDT 3ff14d84 00182 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 3ff14f06 0003C (v01 HP MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 3ff14f42 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 3ff14f7a 0005E (v01 HP ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3ff14fd8 00028 (v01 HP $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ff00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003ff00
[ 0.000000] On node 0 totalpages: 261773
[ 0.000000] free_area_init_node: node 0, pgdat c177e000, node_mem_map f6ffd200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 271 pages used for memmap
[ 0.000000] HighMem zone: 34291 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f6800000 s28864 r0 d24384 u2097152
[ 0.000000] pcpu-alloc: s28864 r0 d24384 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259726
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-7-generic root=UUID=1bc98008-5ca9-4e5e-a9ce-071362809504 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5237440 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff00)
[ 0.000000] Memory: 1005972k/1047552k available (5174k kernel code, 41120k reserved, 2530k data, 732k init, 138248k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1787000 - 0xc183e000 ( 732 kB)
[ 0.000000] .data : 0xc150da4a - 0xc1786540 (2530 kB)
[ 0.000000] .text : 0xc1000000 - 0xc150da4a (5174 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6408000 soft=f640a000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1607.254 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.001007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3214.50 BogoMIPS (lpj=1607254)
[ 0.001015] pid_max: default: 32768 minimum: 301
[ 0.001051] Security Framework initialized
[ 0.001078] AppArmor: AppArmor initialized
[ 0.001081] Yama: becoming mindful.
[ 0.002022] Mount-cache hash table entries: 512
[ 0.002220] Initializing cgroup subsys ns
[ 0.002225] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.002232] Initializing cgroup subsys cpuacct
[ 0.002241] Initializing cgroup subsys memory
[ 0.002255] Initializing cgroup subsys devices
[ 0.002260] Initializing cgroup subsys freezer
[ 0.002265] Initializing cgroup subsys net_cls
[ 0.002270] Initializing cgroup subsys blkio
[ 0.002315] CPU: Physical Processor ID: 0
[ 0.002319] CPU: Processor Core ID: 0
[ 0.002324] mce: CPU supports 5 MCE banks
[ 0.002340] using C1E aware idle routine
[ 0.006245] ACPI: Core revision 20110112
[ 0.013019] ftrace: allocating 22988 entries in 45 pages
[ 0.014090] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.014631] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024673] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[ 0.024998] Performance Events: AMD PMU driver.
[ 0.024998] ... version: 0
[ 0.024998] ... bit width: 48
[ 0.024998] ... generic registers: 4
[ 0.024998] ... value mask: 0000ffffffffffff
[ 0.024998] ... max period: 00007fffffffffff
[ 0.024998] ... fixed-purpose events: 0
[ 0.024998] ... event mask: 000000000000000f
[ 0.024998] CPU 1 irqstacks, hard=f64aa000 soft=f64ac000
[ 0.024998] Booting Node 0, Processors #1 Ok.
[ 0.001999] Initializing CPU#1
[ 0.001999] System has AMD C1E enabled
[ 0.095051] Switch to broadcast mode on CPU1
[ 0.095058] Brought up 2 CPUs
[ 0.095062] Total of 2 processors activated (6431.35 BogoMIPS).
[ 0.095362] Switch to broadcast mode on CPU0
[ 0.095362] devtmpfs: initialized
[ 0.097450] print_constraints: dummy:
[ 0.097486] Time: 22:23:17 Date: 07/06/11
[ 0.097546] NET: Registered protocol family 16
[ 0.097603] Trying to unpack rootfs image as initramfs...
[ 0.097741] EISA bus registered
[ 0.097748] node 0 link 0: io port [1000, fffff]
[ 0.097752] TOM: 0000000040000000 aka 1024M
[ 0.097757] node 0 link 0: mmio [e0000000, efffffff]
[ 0.097762] node 0 link 0: mmio [a0000, bffff]
[ 0.097766] node 0 link 0: mmio [40000000, fe0bffff]
[ 0.097770] bus: [00, ff] on node 0 link 0
[ 0.097774] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.097778] bus: 00 index 1 [mem 0x40000000-0xffffffff]
[ 0.097781] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.097790] ACPI: bus type pci registered
[ 0.097887] PCI: MMCONFIG for domain 0000 [bus 00-06] at [mem 0xe0000000-0xe06fffff] (base 0xe0000000)
[ 0.097892] PCI: MMCONFIG at [mem 0xe0000000-0xe06fffff] reserved in E820
[ 0.097894] PCI: Using MMCONFIG for extended config space
[ 0.097897] PCI: Using configuration type 1 for base access
[ 0.099402] bio: create slab <bio-0> at 0
[ 0.101182] ACPI: EC: Look up EC in DSDT
[ 0.104204] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.104736] ACPI: Interpreter enabled
[ 0.104742] ACPI: (supports S0 S3 S4 S5)
[ 0.104765] ACPI: Using IOAPIC for interrupt routing
[ 0.112815] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.113090] ACPI: No dock devices found.
[ 0.113093] HEST: Table not found.
[ 0.113099] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.113189] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.113351] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.113355] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.113360] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.113364] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored)
[ 0.113368] pci_root PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored)
[ 0.113372] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored)
[ 0.113376] pci_root PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored)
[ 0.113380] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.113384] pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.113388] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.113392] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.113396] pci_root PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
[ 0.113400] pci_root PNP0A03:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored)
[ 0.113404] pci_root PNP0A03:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored)
[ 0.113408] pci_root PNP0A03:00: host bridge window [mem 0x000ec000-0x000effff] (ignored)
[ 0.113412] pci_root PNP0A03:00: host bridge window [mem 0x000f0000-0x000fffff] (ignored)
[ 0.113416] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.113433] pci 0000:00:00.0: [10de:02f7] type 0 class 0x000500
[ 0.113498] pci 0000:00:00.1: [10de:02fa] type 0 class 0x000500
[ 0.113541] pci 0000:00:00.2: [10de:02fe] type 0 class 0x000500
[ 0.113592] pci 0000:00:00.3: [10de:02f8] type 0 class 0x000500
[ 0.113643] pci 0000:00:00.4: [10de:02f9] type 0 class 0x000500
[ 0.113696] pci 0000:00:00.5: [10de:02ff] type 0 class 0x000500
[ 0.113753] pci 0000:00:00.6: [10de:027f] type 0 class 0x000500
[ 0.113796] pci 0000:00:00.7: [10de:027e] type 0 class 0x000500
[ 0.113853] pci 0000:00:02.0: [10de:02fc] type 1 class 0x000604
[ 0.113888] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113892] pci 0000:00:02.0: PME# disabled
[ 0.113913] pci 0000:00:03.0: [10de:02fd] type 1 class 0x000604
[ 0.113946] pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.113950] pci 0000:00:03.0: PME# disabled
[ 0.113970] pci 0000:00:04.0: [10de:02fb] type 1 class 0x000604
[ 0.114010] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114014] pci 0000:00:04.0: PME# disabled
[ 0.114056] pci 0000:00:09.0: [10de:0270] type 0 class 0x000500
[ 0.114263] pci 0000:00:0a.0: [10de:0260] type 0 class 0x000601
[ 0.114276] pci 0000:00:0a.0: reg 10: [io 0x1d00-0x1d7f]
[ 0.114349] pci 0000:00:0a.1: [10de:0264] type 0 class 0x000c05
[ 0.114403] pci 0000:00:0a.1: reg 20: [io 0x3040-0x307f]
[ 0.114414] pci 0000:00:0a.1: reg 24: [io 0x3000-0x303f]
[ 0.114451] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.114458] pci 0000:00:0a.1: PME# disabled
[ 0.114485] pci 0000:00:0a.3: [10de:0271] type 0 class 0x000b40
[ 0.114509] pci 0000:00:0a.3: reg 10: [mem 0xc0040000-0xc007ffff]
[ 0.114653] pci 0000:00:0b.0: [10de:026d] type 0 class 0x000c03
[ 0.114673] pci 0000:00:0b.0: reg 10: [mem 0xc0004000-0xc0004fff]
[ 0.114744] pci 0000:00:0b.0: supports D1 D2
[ 0.114748] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114754] pci 0000:00:0b.0: PME# disabled
[ 0.114777] pci 0000:00:0b.1: [10de:026e] type 0 class 0x000c03
[ 0.114798] pci 0000:00:0b.1: reg 10: [mem 0xc0005000-0xc00050ff]
[ 0.114869] pci 0000:00:0b.1: supports D1 D2
[ 0.114872] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.114878] pci 0000:00:0b.1: PME# disabled
[ 0.114909] pci 0000:00:0d.0: [10de:0265] type 0 class 0x000101
[ 0.114953] pci 0000:00:0d.0: reg 20: [io 0x3080-0x308f]
[ 0.115010] pci 0000:00:0e.0: [10de:0266] type 0 class 0x000101
[ 0.115032] pci 0000:00:0e.0: reg 10: [io 0x30c0-0x30c7]
[ 0.115042] pci 0000:00:0e.0: reg 14: [io 0x30b4-0x30b7]
[ 0.115053] pci 0000:00:0e.0: reg 18: [io 0x30b8-0x30bf]
[ 0.115064] pci 0000:00:0e.0: reg 1c: [io 0x30b0-0x30b3]
[ 0.115074] pci 0000:00:0e.0: reg 20: [io 0x3090-0x309f]
[ 0.115085] pci 0000:00:0e.0: reg 24: [mem 0xc0006000-0xc0006fff]
[ 0.115143] pci 0000:00:10.0: [10de:026f] type 1 class 0x000604
[ 0.115217] pci 0000:00:10.1: [10de:026c] type 0 class 0x000403
[ 0.115239] pci 0000:00:10.1: reg 10: [mem 0xc0000000-0xc0003fff]
[ 0.115312] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.115317] pci 0000:00:10.1: PME# disabled
[ 0.115354] pci 0000:00:14.0: [10de:0269] type 0 class 0x000680
[ 0.115371] pci 0000:00:14.0: reg 10: [mem 0xc0008000-0xc0008fff]
[ 0.115381] pci 0000:00:14.0: reg 14: [io 0x30e0-0x30e7]
[ 0.115435] pci 0000:00:14.0: supports D1 D2
[ 0.115438] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.115443] pci 0000:00:14.0: PME# disabled
[ 0.115461] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.115487] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.115508] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.115531] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.115563] PCI: peer root bus 00 res updated from pci conf
[ 0.115599] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.115605] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.115610] pci 0000:00:02.0: bridge window [mem 0xc2000000-0xc3ffffff]
[ 0.115616] pci 0000:00:02.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.115663] pci 0000:03:00.0: [14e4:4312] type 0 class 0x000280
[ 0.115679] pci 0000:03:00.0: reg 10: [mem 0xc4000000-0xc4003fff]
[ 0.115753] pci 0000:03:00.0: supports D1 D2
[ 0.115771] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.115781] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.115787] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.115792] pci 0000:00:03.0: bridge window [mem 0xc4000000-0xc5ffffff]
[ 0.115798] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.115841] pci 0000:05:00.0: [10de:01d6] type 0 class 0x000300
[ 0.115852] pci 0000:05:00.0: reg 10: [mem 0xc7000000-0xc7ffffff]
[ 0.115865] pci 0000:05:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.115877] pci 0000:05:00.0: reg 1c: [mem 0xc6000000-0xc6ffffff 64bit]
[ 0.115891] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.115921] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.115929] pci 0000:00:04.0: PCI bridge to [bus 05-05]
[ 0.115934] pci 0000:00:04.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.115939] pci 0000:00:04.0: bridge window [mem 0xc6000000-0xc7ffffff]
[ 0.115945] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.115999] pci 0000:07:05.0: [1180:0832] type 0 class 0x000c00
[ 0.116015] pci 0000:07:05.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.116018] pci 0000:07:05.0: MMC cards are now supported by standard SDHCI controller
[ 0.116034] pci 0000:07:05.0: reg 10: [mem 0xc8000000-0xc80007ff]
[ 0.116109] pci 0000:07:05.0: supports D1 D2
[ 0.116112] pci 0000:07:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116118] pci 0000:07:05.0: PME# disabled
[ 0.116141] pci 0000:07:05.1: [1180:0822] type 0 class 0x000805
[ 0.116162] pci 0000:07:05.1: reg 10: [mem 0xc8000800-0xc80008ff]
[ 0.116237] pci 0000:07:05.1: supports D1 D2
[ 0.116240] pci 0000:07:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116246] pci 0000:07:05.1: PME# disabled
[ 0.116267] pci 0000:07:05.2: [1180:0592] type 0 class 0x000880
[ 0.116288] pci 0000:07:05.2: reg 10: [mem 0xc8001000-0xc80010ff]
[ 0.116363] pci 0000:07:05.2: supports D1 D2
[ 0.116366] pci 0000:07:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116371] pci 0000:07:05.2: PME# disabled
[ 0.116393] pci 0000:07:05.3: [1180:0852] type 0 class 0x000880
[ 0.116413] pci 0000:07:05.3: reg 10: [mem 0xc8001400-0xc80014ff]
[ 0.116488] pci 0000:07:05.3: supports D1 D2
[ 0.116491] pci 0000:07:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116497] pci 0000:07:05.3: PME# disabled
[ 0.116548] pci 0000:00:10.0: PCI bridge to [bus 07-07] (subtractive decode)
[ 0.116554] pci 0000:00:10.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.116559] pci 0000:00:10.0: bridge window [mem 0xc8000000-0xc80fffff]
[ 0.116565] pci 0000:00:10.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.116569] pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.116573] pci 0000:00:10.0: bridge window [mem 0x40000000-0xffffffff] (subtractive decode)
[ 0.116578] pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.116593] pci_bus 0000:00: on NUMA node 0
[ 0.116598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.116710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.116747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
[ 0.116784] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.116822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.116852] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.141872] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
[ 0.141983] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
[ 0.142095] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *11
[ 0.142202] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 0.142308] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *11
[ 0.142414] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.142521] ACPI: PCI Interrupt Link [LK3E] (IRQs 1Cool *0, disabled.
[ 0.142627] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
[ 0.142734] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 0.142840] ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10
[ 0.142946] ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
[ 0.143059] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[ 0.143166] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
[ 0.143273] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
[ 0.143380] ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
[ 0.143487] ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
[ 0.143599] ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
[ 0.143714] ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
[ 0.143821] ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10
[ 0.144000] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.144007] vgaarb: loaded
[ 0.144311] SCSI subsystem initialized
[ 0.153019] libata version 3.00 loaded.
[ 0.153097] usbcore: registered new interface driver usbfs
[ 0.153114] usbcore: registered new interface driver hub
[ 0.153155] usbcore: registered new device driver usb
[ 0.153511] wmi: Mapper loaded
[ 0.153514] PCI: Using ACPI for IRQ routing
[ 0.153520] PCI: pci_cache_line_size set to 64 bytes
[ 0.153647] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.153652] reserve RAM buffer: 000000003ff00000 - 000000003fffffff
[ 0.153786] NetLabel: Initializing
[ 0.153789] NetLabel: domain hash size = 128
[ 0.153792] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.153807] NetLabel: unlabeled traffic allowed by default
[ 0.153866] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.153875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.153883] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.157038] Switching to clocksource hpet
[ 0.157297] Switched to NOHz mode on CPU #1
[ 0.157415] Switched to NOHz mode on CPU #0
[ 0.167843] AppArmor: AppArmor Filesystem Enabled
[ 0.167881] pnp: PnP ACPI init
[ 0.167907] ACPI: bus type pnp registered
[ 0.167941] pnp 00:00: [mem 0xe0000000-0xefffffff]
[ 0.168046] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.168052] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.168392] pnp 00:01: [mem 0xffc00000-0xffffffff]
[ 0.168396] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.168400] pnp 00:01: [mem 0xfee00000-0xfeefffff]
[ 0.168403] pnp 00:01: [mem 0xfed00000-0xfed00fff]
[ 0.168477] system 00:01: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.168482] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.168486] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.168491] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.168495] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.168576] pnp 00:02: [bus 00-ff]
[ 0.168580] pnp 00:02: [io 0x0cf8-0x0cff]
[ 0.168584] pnp 00:02: [io 0x0000-0x0cf7 window]
[ 0.168587] pnp 00:02: [io 0x0d00-0xffff window]
[ 0.168591] pnp 00:02: [mem 0x000a0000-0x000bffff window]
[ 0.168595] pnp 00:02: [mem 0x000c0000-0x000c3fff window]
[ 0.168599] pnp 00:02: [mem 0x000c4000-0x000c7fff window]
[ 0.168602] pnp 00:02: [mem 0x000c8000-0x000cbfff window]
[ 0.168606] pnp 00:02: [mem 0x000cc000-0x000cffff window]
[ 0.168610] pnp 00:02: [mem 0x000d0000-0x000d3fff window]
[ 0.168613] pnp 00:02: [mem 0x000d4000-0x000d7fff window]
[ 0.168617] pnp 00:02: [mem 0x000d8000-0x000dbfff window]
[ 0.168620] pnp 00:02: [mem 0x000dc000-0x000dffff window]
[ 0.168624] pnp 00:02: [mem 0x000e0000-0x000e3fff window]
[ 0.168628] pnp 00:02: [mem 0x000e4000-0x000e7fff window]
[ 0.168631] pnp 00:02: [mem 0x000e8000-0x000ebfff window]
[ 0.168635] pnp 00:02: [mem 0x000ec000-0x000effff window]
[ 0.168639] pnp 00:02: [mem 0x000f0000-0x000fffff window]
[ 0.168642] pnp 00:02: [mem 0x40000000-0xfebfffff window]
[ 0.168734] pnp 00:02: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.168759] pnp 00:03: [mem 0xe0000000-0xefffffff]
[ 0.168831] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.168835] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169070] pnp 00:04: [io 0x1000-0x107f]
[ 0.169074] pnp 00:04: [io 0x1080-0x10ff]
[ 0.169077] pnp 00:04: [io 0x1400-0x147f]
[ 0.169080] pnp 00:04: [io 0x1480-0x14ff]
[ 0.169083] pnp 00:04: [io 0x1800-0x187f]
[ 0.169086] pnp 00:04: [io 0x1880-0x18ff]
[ 0.169089] pnp 00:04: [io 0x2000-0x203f]
[ 0.169163] system 00:04: [io 0x1000-0x107f] has been reserved
[ 0.169167] system 00:04: [io 0x1080-0x10ff] has been reserved
[ 0.169171] system 00:04: [io 0x1400-0x147f] has been reserved
[ 0.169175] system 00:04: [io 0x1480-0x14ff] has been reserved
[ 0.169179] system 00:04: [io 0x1800-0x187f] has been reserved
[ 0.169183] system 00:04: [io 0x1880-0x18ff] has been reserved
[ 0.169187] system 00:04: [io 0x2000-0x203f] has been reserved
[ 0.169192] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169208] pnp 00:05: [io 0x0010-0x001f]
[ 0.169211] pnp 00:05: [io 0x0022-0x003f]
[ 0.169214] pnp 00:05: [io 0x0044-0x005f]
[ 0.169217] pnp 00:05: [io 0x0068-0x006f]
[ 0.169220] pnp 00:05: [io 0x0080]
[ 0.169223] pnp 00:05: [io 0x0091-0x0093]
[ 0.169226] pnp 00:05: [io 0x0097-0x009f]
[ 0.169230] pnp 00:05: [io 0x00a2-0x00bf]
[ 0.169233] pnp 00:05: [io 0x00e0-0x00ef]
[ 0.169236] pnp 00:05: [io 0x0360-0x0361]
[ 0.169242] pnp 00:05: [io 0x0380-0x0383]
[ 0.169245] pnp 00:05: [io 0x04d0-0x04d1]
[ 0.169321] system 00:05: [io 0x0360-0x0361] has been reserved
[ 0.169325] system 00:05: [io 0x0380-0x0383] has been reserved
[ 0.169329] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.169334] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.169351] pnp 00:06: [io 0x0000-0x0008]
[ 0.169354] pnp 00:06: [io 0x000a-0x000f]
[ 0.169357] pnp 00:06: [io 0x0081-0x0083]
[ 0.169360] pnp 00:06: [io 0x0087]
[ 0.169363] pnp 00:06: [io 0x0089-0x008b]
[ 0.169366] pnp 00:06: [io 0x008f]
[ 0.169369] pnp 00:06: [io 0x00c0-0x00d1]
[ 0.169372] pnp 00:06: [io 0x00d4-0x00df]
[ 0.169376] pnp 00:06: [dma 4]
[ 0.169417] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.169429] pnp 00:07: [io 0x0061]
[ 0.169465] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.169477] pnp 00:08: [io 0x00f0-0x00f1]
[ 0.169494] pnp 00:08: [irq 13]
[ 0.169535] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.169569] pnp 00:09: [io 0x0070-0x0071]
[ 0.169611] pnp 00:09: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.169666] pnp 00:0a: [irq 0 disabled]
[ 0.169676] pnp 00:0a: [irq 8]
[ 0.169680] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.169720] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.169733] pnp 00:0b: [io 0x0060]
[ 0.169736] pnp 00:0b: [io 0x0064]
[ 0.169745] pnp 00:0b: [irq 1]
[ 0.169784] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.169803] pnp 00:0c: [irq 12]
[ 0.169846] pnp 00:0c: Plug and Play ACPI device, IDs SYN0129 SYN0100 SYN0002 PNP0f13 (active)
[ 0.170418] pnp: PnP ACPI: found 13 devices
[ 0.170421] ACPI: ACPI bus type pnp unregistered
[ 0.170426] PnPBIOS: Disabled by ACPI PNP
[ 0.207635] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.207641] pci 0000:00:02.0: bridge window [io 0x4000-0x4fff]
[ 0.207646] pci 0000:00:02.0: bridge window [mem 0xc2000000-0xc3ffffff]
[ 0.207651] pci 0000:00:02.0: bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.207657] pci 0000:00:03.0: PCI bridge to [bus 03-03]
[ 0.207660] pci 0000:00:03.0: bridge window [io disabled]
[ 0.207664] pci 0000:00:03.0: bridge window [mem 0xc4000000-0xc5ffffff]
[ 0.207668] pci 0000:00:03.0: bridge window [mem pref disabled]
[ 0.207678] pci 0000:05:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.207682] pci 0000:00:04.0: PCI bridge to [bus 05-05]
[ 0.207685] pci 0000:00:04.0: bridge window [io disabled]
[ 0.207689] pci 0000:00:04.0: bridge window [mem 0xc6000000-0xc7ffffff]
[ 0.207694] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.207700] pci 0000:00:10.0: PCI bridge to [bus 07-07]
[ 0.207703] pci 0000:00:10.0: bridge window [io disabled]
[ 0.207708] pci 0000:00:10.0: bridge window [mem 0xc8000000-0xc80fffff]
[ 0.207713] pci 0000:00:10.0: bridge window [mem pref disabled]
[ 0.207725] pci 0000:00:02.0: setting latency timer to 64
[ 0.207732] pci 0000:00:03.0: setting latency timer to 64
[ 0.207738] pci 0000:00:04.0: setting latency timer to 64
[ 0.207745] pci 0000:00:10.0: setting latency timer to 64
[ 0.207750] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.207753] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff]
[ 0.207757] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.207761] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.207765] pci_bus 0000:01: resource 1 [mem 0xc2000000-0xc3ffffff]
[ 0.207769] pci_bus 0000:01: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
[ 0.207773] pci_bus 0000:03: resource 1 [mem 0xc4000000-0xc5ffffff]
[ 0.207777] pci_bus 0000:05: resource 1 [mem 0xc6000000-0xc7ffffff]
[ 0.207781] pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.207785] pci_bus 0000:07: resource 1 [mem 0xc8000000-0xc80fffff]
[ 0.207789] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
[ 0.207793] pci_bus 0000:07: resource 5 [mem 0x40000000-0xffffffff]
[ 0.207797] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.207852] NET: Registered protocol family 2
[ 0.207937] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.208350] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.209233] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.209661] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.209665] TCP reno registered
[ 0.209671] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.209686] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.209810] NET: Registered protocol family 1
[ 0.209843] pci 0000:00:00.0: Found disabled HT MSI Mapping
[ 0.209849] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.209897] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.209926] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.209959] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.412458] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.412517] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.412579] pci 0000:00:09.0: Found enabled HT MSI Mapping
[ 0.412608] pci 0000:05:00.0: Boot video device
[ 0.412622] PCI: CLS 64 bytes, default 64
[ 0.412653] Simple Boot Flag at 0x36 set to 0x1
[ 0.412918] cpufreq-nforce2: No nForce2 chipset.
[ 0.413119] audit: initializing netlink socket (disabled)
[ 0.413131] type=2000 audit(1309990996.412:1): initialized
[ 0.429128] highmem bounce pool size: 64 pages
[ 0.429135] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.431558] VFS: Disk quotas dquot_6.5.2
[ 0.431649] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.432607] fuse init (API version 7.16)
[ 0.432735] msgmni has been set to 1694
[ 0.433096] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.433137] io scheduler noop registered
[ 0.433140] io scheduler deadline registered
[ 0.433164] io scheduler cfq registered (default)
[ 0.433357] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.433394] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[ 0.433449] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.433474] pcieport 0000:00:03.0: irq 41 for MSI/MSI-X
[ 0.433526] pcieport 0000:00:04.0: setting latency timer to 64
[ 0.433551] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[ 0.433645] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.433684] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.434282] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.434559] ACPI: AC Adapter [ACAD] (on-line)
[ 0.434670] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.434677] ACPI: Power Button [PWRB]
[ 0.434739] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.434744] ACPI: Sleep Button [SLPB]
[ 0.434803] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.435057] ACPI: Lid Switch [LID]
[ 0.435139] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.435144] ACPI: Power Button [PWRF]
[ 0.435426] ACPI: acpi_idle registered with cpuidle
[ 0.435457] ACPI: processor limited to max C-state 1
[ 0.438716] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.438721] ACPI: Thermal Zone [THRM] (32 C)
[ 0.438748] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.438882] ERST: Table is not found!
[ 0.438998] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.445352] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.445375] isapnp: Scanning for PnP cards...
[ 0.801185] isapnp: No Plug & Play device found
[ 0.896283] Freeing initrd memory: 17508k freed
[ 0.943550] Linux agpgart interface v0.103
[ 0.945639] brd: module loaded
[ 0.946483] loop: module loaded
[ 0.946634] i2c-core: driver [adp5520] using legacy suspend method
[ 0.946637] i2c-core: driver [adp5520] using legacy resume method
[ 0.946878] pata_acpi 0000:00:0d.0: setting latency timer to 64
[ 0.946905] pata_acpi 0000:00:0e.0: enabling device (0005 -> 0007)
[ 0.947167] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
[ 0.947192] pata_acpi 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23
[ 0.947215] pata_acpi 0000:00:0e.0: setting latency timer to 64
[ 0.947225] pata_acpi 0000:00:0e.0: PCI INT A disabled
[ 0.947774] Fixed MDIO Bus: probed
[ 0.947836] PPP generic driver version 2.4.2
[ 0.947921] tun: Universal TUN/TAP device driver, 1.6
[ 0.947923] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.948074] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.948295] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.948315] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, high) -> IRQ 22
[ 0.948334] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 0.948338] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 0.948390] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
[ 0.948482] ehci_hcd 0000:00:0b.1: debug port 1
[ 0.948494] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 0.948523] ehci_hcd 0000:00:0b.1: irq 22, io mem 0xc0005000
[ 0.954036] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00
[ 0.954206] hub 1-0:1.0: USB hub found
[ 0.954212] hub 1-0:1.0: 8 ports detected
[ 0.954345] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.954617] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.954624] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUS0] -> GSI 22 (level, high) -> IRQ 22
[ 0.954644] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 0.954648] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.954719] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.954789] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xc0004000
[ 1.007217] hub 2-0:1.0: USB hub found
[ 1.007227] hub 2-0:1.0: 8 ports detected
[ 1.007365] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.007488] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.022593] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.022604] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.022785] mousedev: PS/2 mouse device common for all mice
[ 1.023634] rtc_cmos 00:09: RTC can wake from S4
[ 1.023745] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 1.023797] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.023927] device-mapper: uevent: version 1.0.3
[ 1.024069] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.024228] device-mapper: multipath: version 1.2.0 loaded
[ 1.024232] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.024350] EISA: Probing bus 0 at eisa.0
[ 1.024356] EISA: Cannot allocate resource for mainboard
[ 1.024360] Cannot allocate resource for EISA slot 1
[ 1.024363] Cannot allocate resource for EISA slot 2
[ 1.024366] Cannot allocate resource for EISA slot 3
[ 1.024370] Cannot allocate resource for EISA slot 4
[ 1.024373] Cannot allocate resource for EISA slot 5
[ 1.024377] Cannot allocate resource for EISA slot 6
[ 1.024380] Cannot allocate resource for EISA slot 7
[ 1.024384] Cannot allocate resource for EISA slot 8
[ 1.024386] EISA: Detected 0 cards.
[ 1.024501] cpuidle: using governor ladder
[ 1.024504] cpuidle: using governor menu
[ 1.024908] TCP cubic registered
[ 1.025110] NET: Registered protocol family 10
[ 1.025888] NET: Registered protocol family 17
[ 1.025914] Registering the dns_resolver key type
[ 1.025945] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 (2 cpu cores) (version 2.20.00)
[ 1.025992] powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x13
[ 1.025995] powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x1e
[ 1.026098] Using IPI No-Shortcut mode
[ 1.026235] PM: Hibernation image not present or could not be loaded.
[ 1.026250] registered taskstats version 1
[ 1.026628] Magic number: 3:613:400
[ 1.026756] rtc_cmos 00:09: setting system clock to 2011-07-06 22:23:18 UTC (1309990998)
[ 1.026760] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.026763] EDD information not available.
[ 1.026896] Freeing unused kernel memory: 732k freed
[ 1.027438] Write protecting the kernel text: 5176k
[ 1.027495] Write protecting the kernel read-only data: 2132k
[ 1.035871] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.099723] udev[65]: starting version 164
[ 1.183222] acpi device:28: registered as cooling_device2
[ 1.183340] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:26/LNXVIDEO:01/input/input5
[ 1.183420] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.250350] sdhci: Secure Digital Host Controller Interface driver
[ 1.250355] sdhci: Copyright(c) Pierre Ossman
[ 1.253604] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.253845] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 1.253868] forcedeth 0000:00:14.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, high) -> IRQ 20
[ 1.253875] forcedeth 0000:00:14.0: setting latency timer to 64
[ 1.256057] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.257584] sdhci-pci 0000:07:05.1: SDHCI controller found [1180:0822] (rev 19)
[ 1.257804] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[ 1.257821] sdhci-pci 0000:07:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, high) -> IRQ 7
[ 1.258861] sdhci-pci 0000:07:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.276517] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 1.276544] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, high) -> IRQ 19
[ 1.276555] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 1.297833] mmc0: no vmmc regulator found
[ 1.298889] Registered led device: mmc0::
[ 1.299998] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
[ 1.300019] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
[ 1.300026] ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
[ 1.300033] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
[ 1.300047] mmc0: SDHCI controller on PCI [0000:07:05.1] using DMA
[ 1.318186] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 1.319056] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[ 1.319076] firewire_ohci 0000:07:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, high) -> IRQ 5
[ 1.370132] firewire_ohci: Added fw-ohci device 0000:07:05.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 1.589018] CE: hpet increased min_delta_ns to 11520 nsec
[ 1.776366] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:16:36:71:34:e2
[ 1.776373] forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
[ 1.776415] sata_nv 0000:00:0e.0: version 3.5
[ 1.776435] sata_nv 0000:00:0e.0: PCI INT A -> Link[LTID] -> GSI 23 (level, high) -> IRQ 23
[ 1.776440] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 1.776507] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 1.777402] scsi0 : sata_nv
[ 1.777617] scsi1 : sata_nv
[ 1.777804] ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 23
[ 1.777809] ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 23
[ 1.777858] pata_amd 0000:00:0d.0: version 0.4.1
[ 1.777921] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 1.778460] scsi2 : pata_amd
[ 1.778938] scsi3 : pata_amd
[ 1.779632] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[ 1.779637] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[ 1.871166] firewire_core: created device fw0: GUID 009fc000dc4baa00, S400
[ 1.933469] ata3.00: ATAPI: Optiarc DVD RW AD-7543A, 1-00, max UDMA/33
[ 1.933481] ata3: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c600) ACPI=0x701f (60:600:0x13)
[ 1.939393] ata3.00: configured for UDMA/33
[ 2.232060] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.235325] ata1.00: ATA-7: ST9100824AS, 7.24, max UDMA/100
[ 2.235331] ata1.00: 195371568 sectors, multi 16: LBA48
[ 2.241322] ata1.00: configured for UDMA/100
[ 2.241522] scsi 0:0:0:0: Direct-Access ATA ST9100824AS 7.24 PQ: 0 ANSI: 5
[ 2.241791] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.241826] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
[ 2.241916] sd 0:0:0:0: [sda] Write Protect is off
[ 2.241921] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.241948] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.276038] sda: sda1 sda2 sda3
[ 2.276443] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.545043] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.546112] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7543A 1-00 PQ: 0 ANSI: 5
[ 2.547569] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.547574] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.547758] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.547865] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.548058] ata4: port disabled. ignoring.
[ 3.087943] Btrfs loaded
[ 3.095550] xor: automatically using best checksumming function: pIII_sse
[ 3.100012] pIII_sse : 4836.000 MB/sec
[ 3.100016] xor: using function: pIII_sse (4836.000 MB/sec)
[ 3.104251] device-mapper: dm-raid45: initialized v0.2594b
[ 3.268574] md: linear personality registered for level -1
[ 3.272253] md: multipath personality registered for level -4
[ 3.275541] md: raid0 personality registered for level 0
[ 3.280853] md: raid1 personality registered for level 1
[ 3.284165] async_tx: api initialized (async)
[ 3.304063] raid6: int32x1 742 MB/s
[ 3.321014] raid6: int32x2 691 MB/s
[ 3.338080] raid6: int32x4 433 MB/s
[ 3.355118] raid6: int32x8 343 MB/s
[ 3.372046] raid6: mmxx1 1281 MB/s
[ 3.389030] raid6: mmxx2 2351 MB/s
[ 3.406060] raid6: sse1x1 1292 MB/s
[ 3.423041] raid6: sse1x2 2175 MB/s
[ 3.440026] raid6: sse2x1 2195 MB/s
[ 3.457034] raid6: sse2x2 2898 MB/s
[ 3.457037] raid6: using algorithm sse2x2 (2898 MB/s)
[ 3.467196] md: raid6 personality registered for level 6
[ 3.467201] md: raid5 personality registered for level 5
[ 3.467204] md: raid4 personality registered for level 4
[ 3.477255] md: raid10 personality registered for level 10
[ 3.775945] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.433259] udev[386]: starting version 164
[ 5.778733] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 5.778779] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 5.795391] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 6.045585] NV_TCO: NV TCO WatchDog Timer Driver v0.01
[ 6.045702] NV_TCO: Watchdog reboot not detected.
[ 6.045797] NV_TCO: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 6.200183] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.310788] cfg80211: Calling CRDA to update world regulatory domain
[ 6.808113] r852 0000:07:05.3: PCI INT B -> Link[LNK2] -> GSI 7 (level, high) -> IRQ 7
[ 6.808124] r852 0000:07:05.3: setting latency timer to 64
[ 6.808220] r852: Non dma capable device detected, dma disabled
[ 6.808236] r852: driver loaded succesfully
[ 6.890665] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 7.225170] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000/0x0
[ 7.292216] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 7.812905] b43-phy1: Broadcom 4311 WLAN found (core revision 10)
[ 7.834130] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834136] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834140] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834145] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834148] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834152] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834156] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834160] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834163] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834167] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834171] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834175] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834178] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834183] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834186] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834190] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834194] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834198] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834201] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834205] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834209] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834213] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834217] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834221] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834224] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834228] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.834232] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 7.834236] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.952268] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 7.952293] HDA Intel 0000:00:10.1: PCI INT B -> Link[LAZA] -> GSI 21 (level, high) -> IRQ 21
[ 7.952299] hda_intel: Disable MSI for Nvidia chipset
[ 7.952351] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 7.990127] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 7.990133] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.990137] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 7.990142] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.990145] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 7.990149] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.990153] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 7.990157] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm)
[ 7.990160] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Kano
Titel:   BeitragVerfasst am: 07.07.2011, 04:39 Uhr



Anmeldung: 17. Dez 2003
Beiträge: 16790

Es gibt 2 treiber, der binary treiber wird installiert über dieses script - als root starten:

http://kanotix.com/files/fix/dkms/broadcom-wl-dkms.sh
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
MadMax
Titel:   BeitragVerfasst am: 16.07.2011, 09:40 Uhr



Anmeldung: 18. Jan 2005
Beiträge: 162

Hi Kano,
hab das Skript als root gestartet, doch leider funktioniert der interne Wlan-Adapter immer noch
nicht. Hier mal die Ausgabe vom install:
root@Laptop:/home/horst/Downloads# sh broadcom-wl-dkms.sh
(Lese Datenbank ... 108927 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von broadcom-wl-dkms ...

------------------------------
Deleting module version: 5.100.82.38
completely from the DKMS tree.
------------------------------
Done.
--2011-07-16 10:31:49-- http://www.broadcom.com/docs/linux_sta/ ... _38.tar.gz
Auflösen des Hostnamen www.broadcom.com... 208.70.88.55
Verbindungsaufbau zu www.broadcom.com|208.70.88.55|:80... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 1195817 (1,1M) [application/x-gzip]
In »hybrid-portsrc_x86_32-v5_100_82_38.tar.gz« speichern.

100%[=========================================================================================================================================>] 1.195.817 112K/s in 13s

2011-07-16 10:32:04 (90,1 KB/s) - »hybrid-portsrc_x86_32-v5_100_82_38.tar.gz« gespeichert [1195817/1195817]

--2011-07-16 10:32:04-- http://gentoo.mirror.at.stealer.net/por ... ense.patch
Auflösen des Hostnamen gentoo.mirror.at.stealer.net... 88.198.224.205
Verbindungsaufbau zu gentoo.mirror.at.stealer.net|88.198.224.205|:80... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 716 [text/plain]
In »broadcom-sta-5.10.91.9-license.patch« speichern.

100%[=========================================================================================================================================>] 716 --.-K/s in 0s

2011-07-16 10:32:05 (25,7 MB/s) - »broadcom-sta-5.10.91.9-license.patch« gespeichert [716/716]


Creating symlink /var/lib/dkms/broadcom-wl/5.100.82.38/source ->
/usr/src/broadcom-wl-5.100.82.38

DKMS: add Completed.
Using /etc/dkms/template-dkms-mkdebroot@Laptop:/home/horst/Downloads# sh broadcom-wl-dkms.sh
(Lese Datenbank ... 108927 Dateien und Verzeichnisse sind derzeit installiert.)
Entfernen von broadcom-wl-dkms ...

------------------------------
Deleting module version: 5.100.82.38
completely from the DKMS tree.
------------------------------
Done.
--2011-07-16 10:31:49-- http://www.broadcom.com/docs/linux_sta/ ... _38.tar.gz
Auflösen des Hostnamen www.broadcom.com... 208.70.88.55
Verbindungsaufbau zu www.broadcom.com|208.70.88.55|:80... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 1195817 (1,1M) [application/x-gzip]
In »hybrid-portsrc_x86_32-v5_100_82_38.tar.gz« speichern.

100%[=========================================================================================================================================>] 1.195.817 112K/s in 13s

2011-07-16 10:32:04 (90,1 KB/s) - »hybrid-portsrc_x86_32-v5_100_82_38.tar.gz« gespeichert [1195817/1195817]

--2011-07-16 10:32:04-- http://gentoo.mirror.at.stealer.net/por ... ense.patch
Auflösen des Hostnamen gentoo.mirror.at.stealer.net... 88.198.224.205
Verbindungsaufbau zu gentoo.mirror.at.stealer.net|88.198.224.205|:80... verbunden.
HTTP-Anforderung gesendet, warte auf Antwort... 200 OK
Länge: 716 [text/plain]
In »broadcom-sta-5.10.91.9-license.patch« speichern.

100%[=========================================================================================================================================>] 716 --.-K/s in 0s

2011-07-16 10:32:05 (25,7 MB/s) - »broadcom-sta-5.10.91.9-license.patch« gespeichert [716/716]


Creating symlink /var/lib/dkms/broadcom-wl/5.100.82.38/source ->
/usr/src/broadcom-wl-5.100.82.38

DKMS: add Completed.
Using /etc/dkms/template-dkms-mkdeb
copying template...
modifying debian/README.Debian...
modifying debian/changelog...
modifying debian/compat...
modifying debian/control...
modifying debian/copyright...
modifying debian/dirs...
modifying debian/postinst...
modifying debian/prerm...
modifying debian/rules...
copying legacy postinstall template...
Copying source tree...
Building binary package...dpkg-buildpackage: warning: using a gain-root-command while being root
dpkg-source --before-build broadcom-wl-dkms-5.100.82.38
fakeroot debian/rules clean
debian/rules build
fakeroot debian/rules binary
dpkg-genchanges -b >../broadcom-wl-dkms_5.100.82.38_i386.changes
dpkg-genchanges: binary-only upload - not including any source code
dpkg-source --after-build broadcom-wl-dkms-5.100.82.38


DKMS: mkdeb Completed.
Moving built files to /var/lib/dkms/broadcom-wl/5.100.82.38/deb...
Cleaning up temporary files...
Vormals abgewähltes Paket broadcom-wl-dkms wird gewählt.
(Lese Datenbank ... 108923 Dateien und Verzeichnisse sind derzeit installiert.)
Entpacken von broadcom-wl-dkms (aus .../broadcom-wl-dkms_5.100.82.38_all.deb) ...
broadcom-wl-dkms (5.100.82.3Cool wird eingerichtet ...
Removing old broadcom-wl-5.100.82.38 DKMS files...

------------------------------
Deleting module version: 5.100.82.38
completely from the DKMS tree.
------------------------------
Done.
Loading new broadcom-wl-5.100.82.38 DKMS files...
First Installation: checking all kernels...
Building only for 2.6.38-7-generic
Building for architecture i386
Building initial module for 2.6.38-7-generic
Done.

wl.ko:
Running module version sanity check.
- Original module
- No original module exists within this kernel
- Installation
- Installing to /lib/modules/2.6.38-7-generic/updates/dkms/

depmod.......

DKMS: install Completed.
9.44user 3.41system 0:34.61elapsed 37%CPU (0avgtext+0avgdata 243152maxresident)k
211912inputs+86704outputs (3416major+299580minor)pagefaults 0swaps
ERROR: Module b43 does not exist in /proc/modules
ERROR: Module ssb does not exist in /proc/modules
ERROR: Module brcm80211 does not exist in /proc/modules
ERROR: Module brcmsmac does not exist in /proc/modules
update-initramfs: Generating /boot/initrd.img-2.6.38-7-generic
cryptsetup: WARNING: failed to detect canonical device of /dev/sda2
cryptsetup: WARNING: could not determine root device from /etc/fstab
W: mdadm: unchecked configuration file: /etc/mdadm/mdadm.conf
W: mdadm: please read /usr/share/doc/mdadm/README.upgrading-2.5.3.gz .
^Cccd /home/horst/Downloads

root@Laptop:/home/horst/Downloads# ccd /home/horst/Downloads
bash: ccd: Kommando nicht gefunden.
root@Laptop:/home/horst/Downloads#

Nach dem Durchlaufen des Scripts hab ich den Rechner neu gestartet,
unter iwconfig wird nun der interne Wlan nicht mehr angezeigt:
root@Laptop:/home/horst# iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

wlan1 IEEE 802.11bg ESSID:"Pflegefaelle"
Mode:Managed Frequency:2.462 GHz Access Point: BC:05:43:11:28:4B
Bit Rate=48 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=60/70 Signal level=-50 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:6 Missed beacon:0

pan0 no wireless extensions.

greetz
MadMax
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
albatros
Titel:   BeitragVerfasst am: 17.07.2011, 10:53 Uhr



Anmeldung: 17. Dez 2004
Beiträge: 290
Wohnort: Detmold
Hallo MadMax,
Du würdest es den Lesern Deiner Post erheblich leichter machen, wenn Du die Ausgabezeilen in Code Tags einschliessen würdest ( indem Du nicht auf "schnelle Antwort" klickst, sondern auf "antworten"

_________________
albatros
_________
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Kano
Titel:   BeitragVerfasst am: 17.07.2011, 13:02 Uhr



Anmeldung: 17. Dez 2003
Beiträge: 16790

Es kann immer noch sein, dass wlan im bios nicht auf immer an geschaltet ist oder man nen hotkey drücken muss.
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
MadMax
Titel:   BeitragVerfasst am: 18.07.2011, 22:55 Uhr



Anmeldung: 18. Jan 2005
Beiträge: 162

Hi,
@albatros: danke für den Ratschlag, werd ich in Zukunkft beherzigen,
man lernt nie aus...
@Kano: der Eintrag Wlan always on oder ähnlich ist in meinem Bios nicht
zu finden, bei Excalibur hat der interne noch funktioniert...
greetz
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
MadMax
Titel:   BeitragVerfasst am: 10.08.2011, 22:30 Uhr



Anmeldung: 18. Jan 2005
Beiträge: 162

Hi@all,
habs jetzt geschafft meine interne Wlan-Karte zum laufen zu bringen mit apt-get install firmware-b43-installer Smilie
ein modprobe43, iwconfig und ifconfig wlan0 up bringt die karte dann ans netz.
Nun noch eine letzte Frage, was muss ich für einen Befehl eingeben damit die Karte beim Neustart automatisch
geladen wird und ich nicht jedesmal modprobe43, usw. in die Konsole eingeben muss?
Dank schon mal für eure Hilfe,
greetz
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Kano
Titel:   BeitragVerfasst am: 11.08.2011, 06:11 Uhr



Anmeldung: 17. Dez 2003
Beiträge: 16790

In deinem Falle ist wl wohl nicht funktionstüchtig, also löscht man es halt wieder:
Code:
dpkg --purge broadcom-wl-dkms
rm -f /etc/modprobe.d/broadcom-wl.conf
update-initramfs -utk all
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
MadMax
Titel:   BeitragVerfasst am: 12.08.2011, 13:38 Uhr



Anmeldung: 18. Jan 2005
Beiträge: 162

Hi Kano,
danke! hat funktioniert!
greetz
Lachen
 
 Benutzer-Profile anzeigen Private Nachricht senden  
Antworten mit Zitat Nach oben
Beiträge vom vorherigen Thema anzeigen:     
Gehe zu:  
Alle Zeiten sind GMT + 1 Stunde
Neues Thema eröffnen   Neue Antwort erstellen
Vorheriges Thema anzeigen Druckerfreundliche Version Einloggen, um private Nachrichten zu lesen Nächstes Thema anzeigen
PNphpBB2 © 2003-2007 
 
Deutsch | English
Logos and trademarks are the property of their respective owners, comments are property of their posters, the rest is © 2004 - 2006 by Jörg Schirottke (Kano).
Consult Impressum and Legal Terms for details. Kanotix is Free Software released under the GNU/GPL license.
This CMS is powered by PostNuke, all themes used at this site are released under the GNU/GPL license. designed and hosted by w3you. Our web server is running on Kanotix64-2006.