# file:///etc/X11/xorg.conf # http://RzR.online.FR/linux.htm # amilo A laptop
Section "Screen" #--------------------------------------------------------
   Identifier "Screen0"
   Device "radeonigp320m"
#   Device "vesa"
   Monitor    "Amilo15XGA"
   DefaultDepth 16 # !rzr # knx 16 # mdk 24
   DefaultColorDepth 16 # !rzr # knx 16 # mdk 24
   SubSection "Display"
      Depth     1
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     4
      Modes  "800x600" 
   EndSubSection
   SubSection "Display"
      Depth     8
      Modes  "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     15
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     24
      Modes "1024x768" "800x600" "640x480" # "1280x1024"
   EndSubSection
   SubSection "Display"
      Depth     32
      Modes "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
         Depth     16
      Modes  "1024x768" "800x600" "640x480" "640x400" "768x576" "512x380"
     EndSubSection
EndSection # Screen- #
# Modes "1280x1024" "640x480" "1152x864" "1024x768" "640x480" "640x400" "512x380"
# /sbin/lspci  | grep ATI
# 00:00.0 Host bridge: ATI Technologies Inc: Unknown device cab0 (rev 13)
# pcitweak -l
# PCI: 00:00:0: chip 1002,cab0 card 0000,0000 rev 13 class 06,00,00 hdr 00
Section "Device"    # http://rzr.online.fr/q/IGP # 
   Identifier   "radeonigp320m" # IGP = no RAM on GPU
   VendorName    "ATI Technologies Inc" # @ http://www.petitiononline.com/atipet/
   BoardName      "Radeon IGP 320M aka Mobility U1, based on 7500"
   Driver         "radeon" # radeon | vesa | ati # http://rzr.online.fr/q/Radeon
#   BusID          "PCI:1:5:0" # 1:5.0
#   ChipID           0x4c59 # 0x5157 #0x4c59 # both work (with unaccel)
#       VideoRam        65536 # 64M # IGP = no RAM on GPU
#   Option        "NoAccel" # 400-500 fps w/ glxgears
#       Option          "RenderAccel" "off"  # http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=318319
   Option      "DPMS" # power management see bios
   Option          "sw_cursor" # a big white  block instead of the cursor
#   Option      "ForcePCIMode"   "true" # AGP
   Option        "AGPFastWrite" "on" # Will speedup 3D check ; export RADEON_NO_USLEEPS=1 ; export RADEON_NO_IRQS=1 too
        Option          "EnablePageFlip" "on" # Will speedup 3D 
   Option        "AGPMode" "4" #  
   Option        "EnableDepthMoves" "on"
   Screen      0 #
   Option        "Rotate" "off" #
#       Option          "UseFBDev" "true" # must be in kernel
#       Option        "ShadowFB"
#       Option        "ShowCache"
#         Option        "hw_cursor"
   Option       "Display" "Mirror"  #
#   Option          "TwinView" # TVout: 
   Option      "crt_display" # tvout works fine 
#       Option          "SecondMonitorHorizSync"     "30-50" # 28-49 # 31-60
#       Option          "SecondMonitorVertRefresh"   "60" # 50-60 # 50-75
#   Option          "TwinViewOrientation"      "Clone"
   Option          "ConectedMonitor" "CRT, TV"  # DFP,TV # CRT
   Option          "TVStandard" "SECAM" # "PAL-N" # France@duneii/
        Option          "TVOutFormat" "Composite"
        Option          "TVOutput" "PAL-M" # @ http://gatos.sourceforge.net/theater_out.php
        Option          "BIOSHotkeys" "true" # @ http://rzr.online.fr/q/TvOut
   Option          "composite_sync" "off"
#       Option          "NoTwinViewXineramaInfo" "true"
#       Option          "MetaModes" "640x480,640x480;,640x480;640x480,"
#       Option          "MetaModes" "1024x768,NULL;1024x768,640x480+2+22"
EndSection       # Device/ @ /etc/X11/XF86Config-4 # http://rzr.online.fr/
Section "Device"
   Identifier     "vesa"
   Driver         "vesa"
   VendorName     "ATI Technologies Inc"
   BoardName      "Radeon Mobility U1"
   BusID          "PCI:1:5:0"
EndSection
Section "Module" # @ http://rzr.online.fr/q/XWindow
        Load  "dri"    #  http://rzr.online.fr/q/DRI , comment if crashing
   Load  "glx"    # 3d @ http://rzr.online.fr/q/GLX
   Load  "GLcore"    # 3d
   Load  "vbe" # vesa bios ext
   Load  "ddc" # ddc probing of monitor # mdk hasnt this
   Load  "dbe" # doublebuffer ext
   Load  "v4l" # video for linux !rzr
   Load  "extmod" # X's extentions (xv, Xrender, pex5...)
        Load  "bitmap" # bitmap-fonts
   Load  "speedo" # fonts
   Load  "type1" #
   Load  "freetype" #
        Load  "int10" # what is this ?
      Load  "pex5" #
      Load  "record" #
      Load  "xie" #
EndSection # Module
Section "Monitor" # @ http://rzr.online.fr/q/AmiloA
   Identifier   "amilo15XGA"
   VendorName    "Fujitsu-Siemens"
       ModelName    "LCD Flat Pannel 1024x768"
   Option      "DPMS"   "true" # Power Management
   HorizSync 31.5-48.5 # samuel
   VertRefresh 40-70 # samuel
#   HorizSync       28.0 - 78.0 # Warning: This may fry very old Monitors
#   HorizSync       28.0 - 96.0 # Warning: This may fry old Monitors
#   VertRefresh     50.0 - 76.0 # Very conservative. May flicker.
   DisplaySize 304 228 # d = 15 inches = 380 mm  # w = 0.8 * d # h = d * (3/5) 
   # DisplaySize 288 216 # d^2 =  w^2 + ( (3/4)*w ) ^2 ) # w = sqrt ( 16 * d^2  / 25 )
 # actuall 
# These are some Modelines that happen to work on many systems
# Especially the "1024x768" has been thoroughly tested, even on Laptops
   Modeline "640x480"     25.175 640  664  760  800   480  491  493  525 #60Hz
   Modeline "800x600"     40.12  800  848  968 1056   600  601  605  628 #60Hz
   Modeline "1024x768"    85    1024 1056 1152 1360   768  784  787  823
   Modeline "1152x864"    92    1152 1208 1368 1474   864  865  875  895
   Modeline "1152x864"   110    1152 1240 1324 1552   864  864  876  908
   Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908
   Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -VSync
   Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace
   Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054
   Modeline "1280x1024"  126.5  1280 1312 1472 1696  1024 1032 1040 1068 -HSync -VSync
   Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064
   Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064
   Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +VSync
   Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -VSync
   Modeline "1600x1200"  162    1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
   Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -VSync
   Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
   Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +VSync
   ModeLine "1800x1440"  230    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
   ModeLine "1800x1440"  250    1800 1896 2088 2392  1440 1441 1444 1490 +HSync +VSync
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
    
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection # Monitor
Section "Monitor"#----------------------------------------------------------
    Identifier "TV" # http://rzr.online.fr/q/TV
    VertRefresh 50.0 - 50.0 # PAL= 720x576@50Hz
   # TV fullscreen mode or DVD fullscreen output.
   # 768x576 @ 79 Hz, 50 kHz hsync
   ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
EndSection # Monitor
Section "Monitor" # Monitor:
    Identifier   "VGA" # 640x480
    HorizSync    31.5 - 57.0
    VertRefresh  50.0 - 70.0
EndSection # Monitor/
Section "Monitor" ### 17" 43.2 cm / Pitch=0.27mm / 1600x1200 ---------------
          Identifier      "C787"
        VendorName      "Fujitsu Siemens"
        ModelName       "C787"
        HorizSync       30.0 -  85.0 # kHz # auto
        VertRefresh     50.0 - 160.0     # Hz  #auto
   DisplaySize 325 245 # d = 17 # w = sqrt ( 16 * d^2  / 25 )
#       VideoDotRate    "165Mhz"
        Option          "DPMS" "true" # Power Management
#   ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hs>
#    ModeLine "640x480"     50.00 640 656 752 832 480 481 484 509 -hsync -vsyn>
EndSection # Monitor/
Section "ServerLayout" #-------------------------------------------------
   Identifier     "XFree86 Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Keyboard0" "CoreKeyboard"
   InputDevice    "Touchpad Amilo" "CorePointer"
# Serial Mouse not detected # http://rzr.online.fr/q/Mouse
# USB Mouse not detected # http://rzr.online.fr/q/USB
EndSection
Section "ServerFlags"   # @ http://rzr.online.fr/XWindow
    Option       "AllowMouseOpenFail"  "true"
    Option       "power_saver" # !rzr+
    Option       "Blank Time"   "10" # default 10
    Option       "Standby Time" "20" # default 20
    Option       "Suspend Time" "30" # default 30
    Option       "Off Time"     "60" # default 60
#    Option       "Xinerama" "true"
#   DontZap    # disable <Crtl><Alt><BS> (server abort)
#   DontZoom    # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection # -Server Flags
Section "Files"        # @ http://rzr.online.fr/XWindow
   RgbPath      "/usr/X11R6/lib/X11/rgb"
#   ModulePath   "/usr/lib/X11/modules"
   FontPath     "/usr/lib/X11/fonts/misc:unscaled"
   FontPath     "/usr/lib/X11/fonts/misc"
   FontPath     "/usr/lib/X11/fonts/75dpi:unscaled"
   FontPath     "/usr/lib/X11/fonts/75dpi"
   FontPath     "/usr/lib/X11/fonts/100dpi:unscaled"
   FontPath     "/usr/lib/X11/fonts/100dpi"
   FontPath     "/usr/lib/X11/fonts/Speedo"
   FontPath     "/usr/lib/X11/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
   FontPath     "/usr/lib/X11/fonts/cyrillic"
   FontPath     "/usr/lib/X11/fonts/latin2/75dpi"
   FontPath     "/usr/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
   FontPath     "/usr/lib/X11/fonts/Type1"
   FontPath     "/usr/share/fonts/ttf/western"
   FontPath     "/usr/share/fonts/ttf/decoratives"
   FontPath     "/usr/share/fonts/truetype/openoffice"
   FontPath     "/usr/lib/X11/fonts/defoma/CID"
   FontPath     "/usr/lib/X11/fonts/defoma/TrueType"
EndSection
Section "InputDevice" # @ http://rzr.online.fr/q/Keyboard
   Identifier     "Keyboard0" # http://rzr.online.fr/q/Keyboard
      Driver         "kbd" #  xorg
#    Driver         "keyboard" # xfree
   Option         "CoreKeyboard"
   Option          "XkbDisable" # xmodmap
   Option       "XkbLayout" "fr" 
   Option       "XkbModel" "pc102" # 104 105=has_win
   Option      "XkbOptions" ""
   Option       "XkbRules" "xfree86"
#   Option      "XkbVariant"    "nodeadkeys"
#   Option       "XkbOption" "grp:win_switch" # grp:lwin_switch 
#   Option       "XkbOption" "grp:dasda,grp:asd" 
EndSection # how to use win key as a modifier ? #<iive> grp:menu_toggle  
Section "InputDevice"   # @ http://rzr.online.fr/q/Mouse
   Identifier     "Touchpad Amilo" #"PS/2 Mouse" # same in server layout
   Driver       "mouse" # module on 2.6 is psmouse
   Option      "Protocol" "auto" # auto | "PS/2" | "ImPS/2"
#       Option          "CorePointer"
   Option      "Device" "/dev/psaux" #input/mice" #ouse0" # /dev/gpmdata
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70" 
   Option      "SendCoreEvents"  "true"
   Option      "Buttons"   "5"
   Option      "ZAxisMapping"   "4 5"
   Option          "MaxTapTime" "180" # kernel 2.6.11 regression ?
   Option          "MaxTapMove" "110"
EndSection
Section "InputDevice"   # @ http://rzr.online.fr/q/Mouse
   Identifier  "Serial Mouse"  # model Memorex "harry potter" minimouse
   Driver      "mouse"
   Option      "Protocol" "Microsoft"
#   Option      "Protocol" "IMPS/2"
   Option      "Device" "/dev/ttyS0" 
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
   Option       "Buttons"   "5"
   Option       "ZAxisMapping"   "4 5"
EndSection
Section "InputDevice"
        Identifier      "USB Mouse" # @ http://rzr.online.fr/q/USB
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
   Option      "SendCoreEvents"   "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection
Section "DRI"
  Mode 0666  # @ http://rzr.online.fr/q/DRI
  group "video"
EndSection
# file:///etc/X11/xorg.conf # @author 
www.Philippe.COVAL.free.fr
 
Der letzte fglrx, der noch so alte Karten unterstützt hat, war wohl Version 8.28.8, alles danach ist nur noch für neuere Karten.