|
Code:
[ 252.728877] PM: Preparing system for mem sleep
[ 252.728883] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 252.729346] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 252.729398] PM: Entering mem sleep
[ 252.729414] Suspending console(s) (use no_console_suspend to debug)
[ 252.729871] pci 0000:00:02.0: PCI INT A disabled
[ 252.821312] btusb_bulk_complete: hci0 urb f6887400 failed to resubmit (1)
[ 252.822311] btusb_bulk_complete: hci0 urb f6887480 failed to resubmit (1)
[ 252.823311] btusb_intr_complete: hci0 urb f6887e80 failed to resubmit (1)
[ 252.856228] b44: eth0: powering down PHY
[ 252.888059] em28xx #0: disconnecting em28xx #0 video
[ 252.912122] em28xx #0: V4L2 device /dev/vbi0 deregistered
[ 252.912168] em28xx #0: V4L2 device /dev/video0 deregistered
[ 252.912284] xc2028 0-0061: destroying instance
[ 252.928056] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 253.008069] sd 0:0:0:0: [sda] Stopping disk
[ 253.913411] ACPI handle has no context!
[ 253.913419] sdhci-pci 0000:03:01.1: PME# disabled
[ 253.913427] sdhci-pci 0000:03:01.1: PCI INT B disabled
[ 253.913434] ACPI handle has no context!
[ 253.948093] b44 0000:03:00.0: PCI INT A disabled
[ 253.948100] ACPI handle has no context!
[ 253.964159] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 253.980056] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 253.980065] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 253.980074] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 253.980082] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 253.980091] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 254.188104] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 254.204102] PM: suspend devices took 1.476 seconds
[ 254.204226] ricoh-mmc: Suspending.
[ 254.204236] ricoh-mmc: Controller is now re-enabled.
[ 254.204454] ehci_hcd 0000:00:1d.7: PME# disabled
[ 254.224068] ACPI: Preparing to enter system sleep state S3
[ 254.224551] Disabling non-boot CPUs ...
[ 254.328022] CPU 1 is now offline
[ 254.328025] SMP alternatives: switching to UP code
[ 254.333566] CPU0 attaching NULL sched-domain.
[ 254.333570] CPU1 attaching NULL sched-domain.
[ 254.333581] CPU0 attaching NULL sched-domain.
[ 254.333807] CPU1 is down
[ 254.333817] Back to C!
[ 254.333817] Enabling non-boot CPUs ...
[ 254.333817] SMP alternatives: switching to SMP code
[ 254.339368] Booting processor 1 APIC 0x1 ip 0x6000
[ 254.333383] Initializing CPU#1
[ 254.400014] /dev/vmmon[7481]: HostIF_ReadUptime: detected settimeofday: fixed uptimeBase old 18445490680796243304 new 18445490680782243328 attempts 1
[ 254.333383] Calibrating delay using timer specific routine.. 3458.11 BogoMIPS (lpj=6916223)
[ 254.333383] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 254.333383] CPU: L2 cache: 1024K
[ 254.333383] CPU: Physical Processor ID: 0
[ 254.333383] CPU: Processor Core ID: 1
[ 254.428505] CPU1: Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
[ 254.428620] CPU0 attaching NULL sched-domain.
[ 254.429019] Switched to high resolution mode on CPU 1
[ 254.444025] CPU0 attaching sched-domain:
[ 254.444029] domain 0: span 0-1 level MC
[ 254.444032] groups: 0 1
[ 254.444037] CPU1 attaching sched-domain:
[ 254.444040] domain 0: span 0-1 level MC
[ 254.444043] groups: 1 0
[ 254.445022] CPU1 is up
[ 254.445026] ACPI: Waking up from system sleep state S3
[ 254.450939] pci 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 254.450953] pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900003)
[ 254.450999] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 254.451021] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0xffa7c004, writing 0xefebc004)
[ 254.451028] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 254.451036] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100102)
[ 254.451071] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x20100)
[ 254.451085] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 254.451091] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xefd0efd0)
[ 254.451098] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0)
[ 254.451105] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x6 (was 0x0, writing 0xb0b00)
[ 254.451114] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 254.451122] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 254.451175] pcieport-driver 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x20400)
[ 254.451189] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xe011e001)
[ 254.451196] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xefc0efa0)
[ 254.451202] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x7 (was 0x0, writing 0xd0d0)
[ 254.451209] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x6 (was 0x0, writing 0xd0c00)
[ 254.451218] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 254.451227] pcieport-driver 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 254.451288] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 254.451302] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[ 254.451317] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x8 (was 0x1, writing 0xbf61)
[ 254.451333] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 254.451346] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x307)
[ 254.451361] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x8 (was 0x1, writing 0xbf41)
[ 254.451377] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 254.451389] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x405)
[ 254.451405] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x8 (was 0x1, writing 0xbf21)
[ 254.451421] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800000, writing 0x2800001)
[ 254.451464] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 254.451484] ehci_hcd 0000:00:1d.7: PME# disabled
[ 254.451505] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x100f1, writing 0x1fff1)
[ 254.451512] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x90, writing 0xef90ef90)
[ 254.451518] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x2280e0f0, writing 0x228000f0)
[ 254.451532] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100107)
[ 254.451584] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107)
[ 254.451609] ata_piix 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x204)
[ 254.451648] pci 0000:00:1f.3: restoring config space at offset 0xf (was 0x200, writing 0x204)
[ 254.451681] pci 0000:00:1f.3: restoring config space at offset 0x1 (was 0x2800001, writing 0x2800101)
[ 254.451757] iwl3945 0000:0b:00.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 254.451825] iwl3945 0000:0b:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xefdff000)
[ 254.451840] iwl3945 0000:0b:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 254.451860] iwl3945 0000:0b:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506)
[ 254.451983] b44 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x104)
[ 254.452030] b44 0000:03:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xef9fe000)
[ 254.452037] b44 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x4000)
[ 254.452045] b44 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100106)
[ 254.452068] ohci1394 0000:03:01.0: restoring config space at offset 0xf (was 0x4020100, writing 0x4020103)
[ 254.452091] ohci1394 0000:03:01.0: restoring config space at offset 0x4 (was 0x0, writing 0xef9fd800)
[ 254.452098] ohci1394 0000:03:01.0: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[ 254.452107] ohci1394 0000:03:01.0: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 254.452131] sdhci-pci 0000:03:01.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 254.452154] sdhci-pci 0000:03:01.1: restoring config space at offset 0x4 (was 0x0, writing 0xef9fd400)
[ 254.452161] sdhci-pci 0000:03:01.1: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
[ 254.452169] sdhci-pci 0000:03:01.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 254.452194] ricoh-mmc 0000:03:01.2: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 254.452217] ricoh-mmc 0000:03:01.2: restoring config space at offset 0x4 (was 0x0, writing 0xef9fd500)
[ 254.452227] ricoh-mmc 0000:03:01.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100106)
[ 254.452239] ricoh-mmc: Resuming.
[ 254.452249] ricoh-mmc: Controller is now disabled.
[ 254.452262] pci 0000:03:01.3: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 254.452285] pci 0000:03:01.3: restoring config space at offset 0x4 (was 0x0, writing 0xef9fd700)
[ 254.452295] pci 0000:03:01.3: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100102)
[ 254.477476] pci 0000:00:02.0: PME# disabled
[ 254.477485] pci 0000:00:02.1: PME# disabled
[ 254.477497] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 254.477505] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 254.588875] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 254.588883] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 254.588912] usb usb2: root hub lost power or was reset
[ 254.588934] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 254.588942] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 254.588967] usb usb3: root hub lost power or was reset
[ 254.589001] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 254.589008] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 254.589033] usb usb4: root hub lost power or was reset
[ 254.589053] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 254.589061] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 254.589087] usb usb5: root hub lost power or was reset
[ 254.589119] ehci_hcd 0000:00:1d.7: PME# disabled
[ 254.589124] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 254.589131] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 254.589163] pci 0000:00:1e.0: setting latency timer to 64
[ 254.589174] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 254.589180] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 254.589217] ata2.00: _GTF evaluation failed (AE 0x1001)
[ 254.589547] b44 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 254.666054] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[ef9fd800-ef9fdfff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 254.672146] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 254.673166] pci 0000:03:01.3: PME# disabled
[ 254.673173] pci 0000:03:01.4: PME# disabled
[ 255.304325] ata2.00: configured for UDMA/33
[ 255.444699] sd 0:0:0:0: [sda] Starting disk
[ 256.376355] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 256.392542] ata1.00: configured for UDMA/100
[ 256.508048] usb 1-5: reset high speed USB device using ehci_hcd and address 3
[ 256.900042] usb 3-1: reset low speed USB device using uhci_hcd and address 2
[ 257.336041] usb 5-2: reset full speed USB device using uhci_hcd and address 2
[ 257.773076] usb 5-2.1: reset full speed USB device using uhci_hcd and address 3
[ 257.882077] btusb 5-2.1:1.0: no reset_resume for driver btusb?
[ 257.882080] btusb 5-2.1:1.1: no reset_resume for driver btusb?
[ 258.205077] usb 5-2.2: reset full speed USB device using uhci_hcd and address 4
[ 258.393077] usb 5-2.3: reset full speed USB device using uhci_hcd and address 5
[ 258.588974] Registered led device: iwl-phy0::radio
[ 258.588996] Registered led device: iwl-phy0::assoc
[ 258.589060] Registered led device: iwl-phy0::RX
[ 258.589080] Registered led device: iwl-phy0::TX
[ 258.602343] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 258.602350] pci 0000:00:02.0: setting latency timer to 64
[ 258.603509] em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS (2882) @ 480 Mbps (0ccd:005e, interface 0, class 0)
[ 258.603578] em28xx #0: chip ID is em2882/em2883
[ 258.776949] em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
[ 258.776960] em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
[ 258.776971] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
[ 258.776981] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
[ 258.776991] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 258.777002] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 258.777012] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
[ 258.777022] em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
[ 258.777033] em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
[ 258.777043] em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
[ 258.777053] em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
[ 258.777064] em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
[ 258.777074] em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
[ 258.777084] em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
[ 258.777095] em28xx #0: i2c eeprom e0: 30 00 36 00 30 00 39 00 30 00 32 00 30 00 30 00
[ 258.777105] em28xx #0: i2c eeprom f0: 32 00 32 00 36 00 38 00 00 00 00 00 00 00 00 00
[ 258.777117] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xbe13bfbe
[ 258.777120] em28xx #0: EEPROM info:
[ 258.777122] em28xx #0: AC97 audio (5 sample rates)
[ 258.777124] em28xx #0: 500mA max power
[ 258.777126] em28xx #0: Table at 0x27, strings=0x409e, 0x1cde, 0x346a
[ 258.777825] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17)
[ 258.778227] tvp5150 0-005c: chip found @ 0xb8 (em28xx #0)
[ 258.780478] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[ 258.780640] xc2028 0-0061: creating new instance
[ 258.780643] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 258.780652] usb 1-5: firmware: requesting xc3028-v27.fw
[ 260.816200] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 260.816203] b44: eth0: Flow control is off for TX and off for RX.
[ 260.816540] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 271.492032] eth0: no IPv6 routers present
[ 318.780081] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.
[ 318.780202] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/input/input16
[ 318.780337] em28xx #0: Config register raw data: 0xd0
[ 318.781085] em28xx #0: AC97 vendor ID = 0xffffffff
[ 318.781461] em28xx #0: AC97 features = 0x6a90
[ 318.781463] em28xx #0: Empia 202 AC97 audio processor detected
[ 318.908461] tvp5150 0-005c: tvp5150am1 detected.
[ 319.004837] em28xx #0: v4l2 driver version 0.1.2
[ 319.090896] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 319.090900] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 319.090902] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 319.148838] lgdt330x: i2c_read_demod_bytes: addr 0x0e select 0x02 error (ret == -19)
[ 319.148966] em28xx #0/2: dvb frontend not attached. Can't attach xc3028
[ 319.164248] PM: resume devices took 64.696 seconds
[ 319.164251] ------------[ cut here ]------------
[ 319.164259] WARNING: at /usr/src/linux-2.6.31-10-generic/ubuntu-2.6/kernel/power/suspend_test.c:52 suspend_test_finish+0x80/0x90()
[ 319.164263] Hardware name: MM061
[ 319.164265] Component: resume devices
[ 319.164267] Modules linked in: i915 drm i2c_algo_bit binfmt_misc vboxnetadp vboxnetflt ppdev lp vmnet parport_pc parport vmblock vmci vmmon ip6table_filter ip6_tables xt_hashlimit iptable_raw xt_comment xt_owner xt_recent xt_iprange xt_policy xt_multiport ipt_ULOG ipt_REJECT ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE ipt_LOG ipt_ECN ipt_ecn ipt_CLUSTERIP ipt_ah ipt_addrtype xt_tcpmss xt_pkttype xt_physdev xt_NFQUEUE xt_MARK xt_mark xt_mac xt_limit xt_length xt_helper xt_dccp xt_conntrack xt_CONNMARK xt_connmark xt_CLASSIFY xt_tcpudp xt_state iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_mangle nfnetlink iptable_filter ip_tables x_tables dm_crypt vboxdrv lgdt330x em28xx_dvb dvb_core em28xx_alsa snd_hda_codec_idt tuner_xc2028 snd_hda_intel snd_hda_codec snd_pcm_oss snd_mixer_oss tuner tvp5150 snd_pcm snd_seq_dummy joydev arc4 em28xx snd_seq_oss dell_laptop ir_common ecb snd_seq_midi dcdbas v4l2_common videodev v4l1_compat videobuf_vmalloc videobuf_core dell_wmi btusb video iwl3945 tveeprom psmouse output iwlcore serio_raw snd_rawmidi pcspkr snd_seq_midi_event mac80211 snd_seq snd_timer snd_seq_device cfg80211 snd soundcore snd_page_alloc usbhid ohci1394 sdhci_pci sdhci ieee1394 ricoh_mmc b44 led_class ssb mii intel_agp agpgart fbcon tileblit font bitblit softcursor
[ 319.164378] Pid: 7481, comm: pm-suspend Not tainted 2.6.31-10-generic #34
[ 319.164381] Call Trace:
[ 319.164387] [<c01732c0>] ? suspend_test_finish+0x80/0x90
[ 319.164391] [<c01732c0>] ? suspend_test_finish+0x80/0x90
[ 319.164397] [<c01437ec>] warn_slowpath_common+0x7c/0xa0
[ 319.164401] [<c01732c0>] ? suspend_test_finish+0x80/0x90
[ 319.164406] [<c0143856>] warn_slowpath_fmt+0x26/0x30
[ 319.164410] [<c01732c0>] suspend_test_finish+0x80/0x90
[ 319.164414] [<c01730df>] suspend_devices_and_enter+0x8f/0xc0
[ 319.164418] [<c01731d4>] enter_state+0xc4/0xd0
[ 319.164422] [<c01728af>] state_store+0x8f/0xd0
[ 319.164426] [<c0172820>] ? state_store+0x0/0xd0
[ 319.164431] [<c0310904>] kobj_attr_store+0x24/0x30
[ 319.164436] [<c023725b>] flush_write_buffer+0x4b/0x70
[ 319.164440] [<c0237344>] sysfs_write_file+0x44/0x70
[ 319.164446] [<c01e7569>] vfs_write+0x99/0x180
[ 319.164452] [<c0576ff8>] ? do_page_fault+0x1a8/0x390
[ 319.164455] [<c0237300>] ? sysfs_write_file+0x0/0x70
[ 319.164460] [<c01e76fd>] sys_write+0x3d/0x70
[ 319.164464] [<c010310c>] syscall_call+0x7/0xb
[ 319.164467] ---[ end trace 0acba162aa607271 ]---
[ 319.164549] PM: Finishing wakeup.
[ 319.164552] Restarting tasks ...
[ 319.169545] /dev/vmnet: open called by PID 6106 (vmnet-bridge)
[ 319.169566] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 319.169586] /dev/vmnet: port on hub 0 successfully opened
[ 319.169603] bridge-eth0: up
[ 319.169612] bridge-eth0: attached
[ 319.188241] done.
[ 319.524596] tvp5150 0-005c: tvp5150am1 detected.
[ 326.669250] b44: eth0: powering down PHY
[ 326.670230] bridge-eth0: disabling the bridge
[ 326.685080] bridge-eth0: down
[ 326.685109] bridge-eth0: detached
[ 326.995841] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 330.000224] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 330.000233] b44: eth0: Flow control is off for TX and off for RX.
[ 330.000880] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 330.002958] /dev/vmnet: open called by PID 6106 (vmnet-bridge)
[ 330.002979] /dev/vmnet: hub 0 does not exist, allocating memory.
[ 330.003018] /dev/vmnet: port on hub 0 successfully opened
[ 330.003044] bridge-eth0: up
[ 330.003052] bridge-eth0: attached
[ 340.640038] eth0: no IPv6 routers present
Sonderlich schlau, wo das Problem sein könnte, werde ich daraus nicht. Sehe nur, dass der Resume-Vorgang 64 Sekunden gedauert hat. Ziemlich lange.  |
